• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Why is My Car Ignition Locked?

There are many reasons why your ignition in your car may be locked. One reason is that the key is dirty or has a broken wafer inside. This can be repaired by sliding the key into and out of the cylinder multiple times.

Another possibility is that the pins inside the lock cylinder are stuck. You can tap the cylinder lightly using a small tack-hammer.

Check the Battery

The transmission shifter switch may be malfunctioning if the vehicle is in Park, neutral or won't start when the key is switched on. This can be repaired by moving the shifter up or down to get the car in the correct gear.

If the car ignition replacement is still unable to turn, the problem could be due to the neutral safety cable, or the shifter in the transmission. They can be fixed by a mechanic, or a local automotive locksmith.

The ignition cylinder could also be worn out. Over time, the ignition as well as the key may wear out, causing them to become difficult to insert or remove. A lubricant, such as silicon lock grease could solve this issue, letting the wafers to slide into the proper position.

The lint in your pocket and the adhesive from tapes that hold packages together can also build on the key, which prevents it from sliding into the ignition. You can clean the keys with a cloth, or a cleaner, such as Triflow, to solve this issue. You could also test a spare key to determine if the issue is with the ignition or the key.

While the key is in ignition you can tap it with an hammer that is small. This can cause a slight vibration, which may be enough to loosen up the wafers inside the ignition and allow them to slide in place. You should be careful not to scratch the ignition cylinder or the key.

If all of the above methods are unsuccessful, it's time to call a locksmith or automotive mechanic to have it looked at. It could be that the key is damaged inside the ignition or it may be time to replace the whole thing. If the problem is with the key, a locksmith can make a new one for you. If the cylinder for the ignition is the issue then you'll need to take the vehicle to a repair shop for it to be repaired. Luckily, these problems are usually very easy to solve.

Check the steering wheel

A steering wheel that is locked may cause the ignition to stop turning. It can happen when an individual driver is unintentionally engaged with the steering wheel when they exit or enter the vehicle. This is typically caused by pulling the wheel while holding it against their body. It could also happen if a passenger in the rear seat accidentally engages the brakes as they get out of the vehicle.

This is a quick fix that doesn't involve going to the mechanic or locksmith. First, make sure the gear shift is in either Park or neutral. If it isn't, simply push or pull the shifter gently until it moves into one of these positions. Also, you should activate the handbrake or press the brake prior to turning the key.

If the wheel isn't locked, a quick examination of the steering column should confirm that the key is in contact with the lock cylinder. A small "Lock label is typically located in the lower part of the ignition circle. It is possible to disengage the lock by gently jiggling the key or pulling on it with moderate force. It is essential not to use excessive force since this could damage the key or cut off a wafer within the lock cylinder.

Another option is to use an alternate key to see whether it is able to unengage the lock. This could mean that the original key is worn out and no capable of engaging the wafers in the lock cylinder. A professional at Karl Chevrolet Webster City can make a new key if this is the case.

If the key does a new ignition switch require a new key not engage after spraying the penetrating lubricant it may help. Apply a small amount of penetrating oil to the ignition and keyhole. Then, jiggle the key or tap it lightly to get it working. If this does a new ignition switch require a new key not work, you'll likely have to visit an expert at your local auto dealer. They can provide you with a new key and also replace the ignition cylinder in case of need.

Check the Key

If you're unable to get your key to turn in the ignition, it's likely that there is something wrong with your key. You can try taking off any foreign material on the key (lint, adhesive from packing tape, etc). You can also try rubbing alcohol on the key or Goo Gone to see if it aids.

If the pins inside the lock do not move correctly when you insert your key, it is possible that they are stuck. You can test an extra key by gently sliding it out of the ignition after having insert it. You should be capable of hearing and feeling the pins move inside. If you can't hear or feel any movement, you can grease them with graphite. You can purchase graphite in small tubes that can be put directly into the keyhole. This will help the pins slide into place as you insert the key and prevent them from getting stuck.

A more serious issue with your key could be that it has become damaged or worn out, making it unable to connect the internal pins inside the ignition cylinder. This could cause the ignition cylinder not to turn, and prevent you from starting your vehicle. If this happens you'll need to take your vehicle to a locksmith or repair shop for repair.

If you're able to turn your car with a spare key and you have eliminated any problems with the battery or steering wheel it could be because the ignition cylinder is been worn out. You can try to loosen the lock with a blunt screwdriver or a handle of a small hammer. Do not use the head. Often, tapping gently on the cylinder will release it and allow you to turn the key of your car. If this doesn't work it is necessary to replace the lock cylinder by a mechanic.

Check the Ignition Socket

The ignition socket is where your key is inserted and removed when it is inserted. It could get blocked with dust, or simply wear and tear. You can inject some silicon lock lubricant in the ignition.

You can also use a small hammer, and tap gently on the inside of the ignition in order to loosen or reset pins that are not aligned. Again, be very careful not to overdo this, or you could cause serious damage to the ignition switch.

It is important to check that your car's gearbox is set to park or neutral before you attempt this. A lot of newer vehicles come with a system which locks the steering wheel if it is not in neutral or park. This could prevent the ignition key from being turned.

If you've tried all of these methods and your key still won't turn, it could be that the ignition housing has to be replaced. Different vehicles have different methods of replacing the ignition cylinder, therefore it is essential to follow the correct procedure.

Generally, this involves removing the plastic cover that covers the steering column and ignition assembly. To remove this cover, you'll have to first adjust the tilt-wheel to its lowest position and then loosen any fasteners holding it in place.

Once the cover has been removed, you'll have to take the old ignition cylinder out of the steering column. Then, you'll have to check the new ignition cylinder you purchased with the one that was removed to make sure that they are identical. After this step you can then install the new ignition cylinder in exactly the same way that you did with the old one.

It is possible that, despite our best efforts, an ignition may become damaged and require to be replaced. If this happens, it's recommended to contact an Tempe Locksmith for assistance. A locksmith can assist you choose the right replacement and install it correctly so that your vehicle can begin again.