• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Replace Door Locks

Replacing the door lock could be a difficult task. It is crucial to protect your home from potential intruders and also to change locks if you move in with an additional housemate or have let out your home.

The majority of new locks are designed to fit standard door widths. If your door is thicker you will need a "thick-door" kit that has longer screws and longer tail pieces for deadbolts.

Take off the lock that was previously used.

If you're changing the lock on your door you must take the old lock off the door. This can be accomplished with some basic tools, but you need to be careful not to cause damage to the frame or door. Using the right tools will help you avoid costly repairs in the future.

Start by taking off the screws that hold the handle and then trim. You can use a screwdriver to do this. Once the screws are removed, you can pull the trim off. You can then get to the screw that holds the handle and trim to the door. After removing the screw, you can remove the handle and remove the lock cylinder from the door.

If you're unable to turn your keys inside, it is an indication that the lock is not working. This is due to the tumblers becoming worn out and eventually will stop moving up and down making it impossible for the lock to function. If this happens, you'll have to take the lock to a locksmith in order to be rekeyed.

If you're ready to replace your deadbolt, begin by removing the screws that fix the faceplate. If your kit doesn't include new screws, you can purchase them at an hardware store. If you're installing a mortise lock you should also remove the screws that secure the external rose plate to the door. After removal of the screws, take off the plate and dead bolt.

Then, look for a pinhole on the interior trim of the handle. If you find a pinhole you can insert a straightened safety pin into it. You can also employ a flat screwdriver press against the depression. This will release the handle and reveal screws which can be removed to remove the entire lock case from the door.

Installing the new lock

If you're looking to replace your lock following a burglary or simply want to update the look of your door, installing an entirely new lock is easy. However, it is essential to measure the door in order to ensure that you purchase an appropriate lock that is the correct size for your door. This is especially crucial for deadbolts, as they require a specific size to fit inside the strikeplate and bolt pocket. Contact your local hardware store for assistance in case you don't know what size to use.

If you're replacing window locks a mortice lock, make use of the existing centre rail as a reference for the positioning of the new mortise lock. Once you've marked the location of the lock, drill holes along the central line of the same size as the lock. Then, chisel the wood until you've got an even rectangular space that will fit the mortice lock. Insert the lock and then outline the faceplate with a marking blade. Mark and drill screw holes to secure the faceplate into place.

You can save money on making rekeys on locks by buying an initial set that includes keys that can be re-keyed and a blank key. These kits can be purchased from many online retailers as well as hardware and home improvement stores. The kits also come with instructions to assist you in completing your project.

If you're renting, be sure to check the lease agreement prior to changing locks. You might be required to give the landlord the keys to the new locks. If so, you may be required to remove the old lock and replace it with a new double glazed window lock mechanism replacement; published on Morphomics,. You can buy a basic window lock replacements from your local hardware store or you can buy an advanced lock that is connected to your home's WiFI and lets you to lock and unlock the door remotely. Schlage Smart Lock is compatible with all levers and knobs. The system can be linked to a security hub for your home so that you can receive alerts when your door is locked or opened.

Installing a new lock

A damaged lock could pose an issue for security, so it is essential to replace it as fast as you can. It's easy to replace the door window lock repairs. The first step is to remove the old lock. The screws that hold the lock in place are removed and the lock is pulled out. Depending on the type you have, you might need an Allen wrench or screwdriver. Save all the parts of the lock you have lost and store them in a secure location.

Then, you can install the new lock on the door. The majority of kits come with a cardboard template showing how the lock will fit on the door. If the template does not fit your door, use a pencil to trace around it or use a chisel for extra material removal. Be sure that the inside latch plate is aligned with the mortise opening once the new lock is installed.

Be cautious not to over tighten the lock when you install it. This could cause the lock to rattle or even break. If you have a keyed lock make sure the spindle is in alignment with the hole in the knob. If it's not, make use of the screwdriver to push through the lock into the knob.

Install the baseplate with the design that is included with the lock after you've completed installing it. If the lock doesn't come with a base plate then you can purchase one that is compatible with your hardware.

Test the new lock to make sure it works. You can do this by inserting the key into the lock and turning it to make sure that it is able to open. If it isn't working then you should contact locksmith.

Rekeying your locks with professionals can also help prevent break-ins. This process involves changing the internal lock tumblers so that it will no longer accept your old keys. This will allow you to feel safe and secure in your home.

Test the new lock

When installing a new lock you need to ensure that it works as intended. This is why it's essential to follow the guidelines carefully. You may not be able open your door if don't. If you're unsure of what to do, call a professional locksmith for help. A locksmith can also give advice about the best locks for your home.

If you are having difficulty opening your lock, there may be a problem with the handle or latch. It is possible to lubricate the latch using graphite or spray it with WD-40. This can sometimes solve the issue. It may be necessary to replace it if the latch isn't working properly.

The lock could have been installed incorrectly. The door handle clip is usually damaged or missing from the new lock. In this instance you need to grasp the handle from the inside and insert a new plastic retainer clip. The handle will then be linked to the lock and the lock tested.

It is important to test the keypad after replacing the lock to make sure it works correctly. You can test it by putting the key inside and turning it. If the keypad functions correctly, it will unlock and lock your door.

You should also check the deadbolt lock to see if it's functioning correctly. If it's not working, remove the latch from the door and undo the Phillips-head screws. Replace the deadbolt you have used with the new one. Make sure to orient and load the deadbolt lock properly.

Spindle testing is a different method to test the new lock. This can be accomplished by inserting a screwdriver into the spindle. This test should be performed before reinstalling the lock to ensure that there aren't any mistakes.