• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Cat flaps allow your pet to leave and come as they please without having to let them in or out. They can also help prevent your cat from peeing in the house.

Fitting a cat flap in the door panel made of upvc is a lot easier than a glass door, but it does require some skills and the appropriate tools.

Measure the Door

Installing a cat flap on a door can be tricky but as long as you choose the right type of cat flap, take your time and follow the steps provided it shouldn't be a problem. We will show you how to draw the shape, use an jigsaw for cutting out the door's area and then finish the job by securing the flap to the door. This will ensure that the flap stays in position and protects the doors from the damage caused by rain and wind.

To determine the size of the cat flap that you need, measure your pet's width. This will ensure that the flap is large enough that your pet can leave and enter the home without having to open and close the door every time, yet small enough to prevent them from moving too far in either direction.

Once you have the measurements, you can mark the location on the door where the template should be positioned, typically this is done using an X. However, some kits come with an illustration that outlines where to drill, if yours does, then you can stick it to the door and draw a line around the door. If your door has sill or moulding on the bottom of it then make sure you have enough clearance from these because this will ensure your cat's safety and will prevent them from getting access to your home.

Use a set square to ensure that you are cutting correctly and to ensure the hole is a perfect rectangle shape. When you are satisfied with this, you are able to start removing the remaining door material. If you have a set square then use it to ensure that you are cutting correctly and to ensure that the hole is a proper rectangle. Once you are satisfied with the shape, you can begin to take off the remaining door material.

Draw a Line

The cat flap is a great way to allow your pet to go out and in without worrying about them being a nuisance to guests or leaving unwanted gifts inside the house. It also helps prevent draughts and helps keep your home's temperature steady. However, fitting an animal flap on your door can seem like an intimidating task for those who've never done it before, which is why many people to seek out an expert joiner or carpenter to do the job. While this is certainly an option, it is possible to do the job yourself if you own the right tools and follow the instructions with care.

While this is far simpler to accomplish when using a timber door it is still possible to do this in uPVC doors, but you should be careful not to scratch the doors as this will cause damage to your warranty. The first step is to take measurements of the door, making sure that it is able to accommodate the new cat flap. This should be easy enough when you have a standard uPVC door, but you may need to take more care if you have an alternative type of door since these are more difficult to cut into than solid uPVC panels.

The next step is to determine the height of your cat's stomach. This is the amount of height between the floor and the underside of your cat's stomach. You'll need to locate a space at the entrance that will allow your pet to move through easily. Once you've got the information, you'll be required to mark the space with a spirit-level and a pencil so that you are sure that the opening will fit your cat.

Once you've marked the area, it's time to cut the hole. It is important to be patient and use a jigsaw ensure the cuts are smooth and clean not rough and uneven. This could damage your door. Wear safety glasses and a dust mask while working with a Jigsaw. Inhaling sawdust is hazardous for your health. After you've completed the cutting, you will have to smooth the edges of the hole using sandpaper, so that the cat flap installers flap can be fitted easily in place.

Cut a Hole

Getting a cat flap fitted to an existing door panel or double glazing sealed unit can be quite difficult. It is tempting to tackle the task yourself, but unless have a lot of experience in DIY it is recommended to hire a professional in to do the task for you. A mistake could not only be ugly, but also pose security risks. It could let cold air to enter when the cat is outside and hot air out when it is inside.

The first thing you need to do is mark the location of the hole in the door using pencil and an ax level. This will ensure that it is positioned and that it runs flush with all the other parts of the door. You should make sure you have an sandpaper piece on ready to smooth out any rough edges.

After the line is traced, you must cut the hole with a jigsaw, remember to wear any necessary safety gear for working with a power tool. If you are worried about the noise of the jigsaw, consider buying a cordless version which is quieter and more user-friendly to use.

It is best to only remove the material that is required to fit the flap. It is important to leave a little extra material for the wall thickness of the flap. However, removing too much can cause issues or even damage the door frame.

If the upvc door features a metal panel or frame, it may interfere with the microchip flap. In this situation you'll need to create an extra-large hole to ensure that the metal does not get in contact with the wall of the flap.

If you're planning to install a cat flap into windows made of double glazing cat flap-glazed or upvc with metal frames it is necessary to speak with a specialist. They can provide you with a new piece of glass with the hole that is already designed for the cat flap. It is much less expensive to have this done than trying to fix a cat flap into an existing glass pane that was not designed specifically for the purpose.

Install the Flap

cat flap in upvc door panel flaps give your pet the freedom to come and go whenever they like, allowing them to relax at home whenever they'd like. If you've got a upvc door panels cat flap door, it might be difficult to put in a cat flap double glazing flap, particularly when you don't have glass panes that can be cut for one. If you're able to buy and install a replacement half-glazed uPVC panel then it is possible to add a cat flap to these doors. It's not as easy as cutting a hole through the door though and there are some things you'll need to do first to ensure it's secure.

A composite door cat flap, uPVC, or GRP door panel is usually composed of a plastic skin which is bonded to an insulating polystyrene base. The material is extremely fragile and care must be taken when cutting into it to avoid causing damage. This kind door has a template can be used to cut the hole.

Once you have marked the location of the hole in your door, now it's time to put in the cat flap. You can buy and fit various models, from basic button operated ones to ones that are activated by microchips that only let in your pet. Whatever type of cat flaps you choose it's essential that your cat is able to use the flap comfortably without getting caught in bad weather.

It's a good idea to opt for a circular fitting rather than one that is square, because circles are more securely cut into the door glass. This is because square holes are more likely to break the glass when drilled. This is also a safer choice, as you won't have to drill into the toughened glass, which could shatter and harm your pet or family. This is particularly important if there are elderly or children in your home who might be injured by glass shattering.